Huawei P60 phone case edge scratches repair tips
When a Huawei P60 falls, the first thing many notice is the shallow nick that forms along the edge of the case. Though it may seem minor, a scratched edge can become a source of irritation over time and can also make a phone case look worn and unprofessional. This article will guide you through every step you need to take to fix those scratches, keep your case looking fresh, and protect your device for years to come.
Understanding Edge Scratches
Edge scratches are usually caused by friction between the case and surfaces that are rough or contain sharp corners. The most common scenarios include:
- Placing the phone on a carpet or wood floor after a drop.
- Sliding the case inside a bag or backpack where it rubs against other items.
- Using the phone while it is still in a case with a hard edge that touches the pocket or seat.
The severity of a scratch ranges from a faint discoloration to a deeper groove that may even compromise the structural integrity of the case. If left untreated, repeated contact can widen the scratch and eventually lead to cracks or fractures.
Why Fixing the Scratch Matters
- Aesthetic Appeal – A clean edge restores the sleek look of the Huawei P60 and keeps the case visually appealing.
- Protective Functionality – A smooth edge reduces the risk of further chipping or breakage of the case material.
- Resale Value – A well‑maintained case can boost the resale value of both the phone and the accessory.
- Personal Satisfaction – Taking care of your phone accessories shows you value the product and are invested in its longevity.
Prevention First: Keep Scratches From Getting There
Before you dive into repair techniques, it is worthwhile to adopt habits that reduce the chance of future edge damage.
Keep Your Phone In the Right Spot
- Use a dedicated phone case drawer or a padded pouch inside your bag.
- Avoid sliding the phone in and out of tight spaces where the case can catch on other objects.
Choose a Case with a Protective Edge
- Look for cases that have a raised lip or a rubberized border. These designs cushion the edge against friction.
- Memory‑foam or silicone cases generally tolerate scratches better than rigid polycarbonate or hard plastic models.
Avoid Unnecessary Handling
- When putting on or taking off the case, hold the phone by the center of the back panel rather than the edges.
- Do not place the phone on a rough surface when it is still in its case; let it rest on a smooth table or surface.
DIY Repair Techniques for Minor Edge Scratches
Most edge scratches are superficial and can be tackled at home with a few household items. The goal is to reduce visibility and smooth the damaged area.
1. Polishing with a Soft Cloth and Mild Soap
- Clean the Surface – Mix a small amount of mild dish soap with warm water. Dip a microfiber cloth into the solution and gently wipe the scratched area. Rinse the cloth and repeat to remove any residue.
- Dry Thoroughly – Use a dry microfiber cloth to blot the area. Avoid rubbing, which can create additional scratches.
- Apply a Light Polishing Compound – For light scratches, a gentle polish such as a dent‑removal paste or a small amount of toothpaste can help. Apply a tiny dab on a microfiber cloth.
- Rub in a Circular Motion – Gently rub the compound into the scratch for about 30 seconds. The compound contains tiny abrasives that smooth the scratch’s surface.
- Wipe Clean – Remove all traces of the polish with a clean, damp cloth and dry again.
If the scratch remains visible after this procedure, you may need a stronger polishing agent or a professional service.
2. Using a Commercial Scratch‑Removal Kit
Many electronics stores sell dedicated scratch‑removal kits that contain a low‑grit abrasive paste and a polishing cloth. Follow the instructions on the package carefully. These kits are typically designed for plastic and silicone surfaces and can effectively reduce moderate scratches.
3. Silicone Sealant Trick
If the scratch has caused a shallow groove that is still filled with debris, a small amount of clear silicone sealant can help:
- Clean the Area – As before, wipe away any dirt.
- Apply the Sealant – Use a small brush or a fingertip to apply a thin layer into the groove.
- Smooth It Out – Gently press down so that the sealant sits flush with the surrounding case surface.
- Let It Cure – Allow the sealant to dry completely, usually within a few hours. Once cured, the groove will be less noticeable.
Caution: Use a sealant that matches the color of your case; otherwise, you’ll end up with a visible patch.
When to Seek Professional Repair
If the scratch is deep, the case material is cracking, or the DIY methods fail to bring back the desired look, professional help is advisable. Professionals can:
- Use specialized abrasion tools that are more precise.
- Apply UV‑curing clear coats to restore the finish.
- Replace damaged sections of the case with a fresh piece.
Most phone case retailers or phone repair shops offer these services. Check their reputation and ask to see before‑and‑after photos of previous work.
Choosing a Case That Lasts
Selecting a high‑quality case can reduce the likelihood of scratches in the first place. Here are a few key features to look for:
Material Matters
| Material | Pros | Cons |
|---|---|---|
| Polycarbonate | Durable, scratch‑resistant | May still develop fine scratches |
| TPU (Thermoplastic Polyurethane) | Flexible, shock‑absorbent, easier to clean | Can discolor over time |
| Silicone | Soft edges, excellent grip | Less rigid, may stain |
| Hybrid (Hard shell + soft inner layer) | Combines impact protection and edge softness | Can be heavier |
Edge Design
- Raised Lip – Creates a physical barrier that protects the phone’s edge from rubbing directly against surfaces.
- Soft‑Touch Coating – Adds a layer that reduces friction, especially useful for cases that will be handled frequently.
Color and Finish
- Matte finishes tend to hide scratches better than glossy surfaces.
- If you prefer a bright or metallic color, consider a case with a nano‑coating that repels dust and scratches.
Step‑by‑Step Guide: Repairing a Deep Scratch on a Hard‑Plastic Case
If your Huawei P60 case has a deep, noticeable groove, follow this detailed procedure to restore it.
Materials Needed
- Fine‑grit sandpaper (1200 to 2000 grit)
- Microfiber cloth
- Water or isopropyl alcohol
- Clear polyurethane or marine varnish (optional)
- Small brush or applicator
Procedure
1. Prepare the Surface
- Clean the area around the scratch with isopropyl alcohol to remove oils and dirt.
- Pat dry with a microfiber cloth.
2. Lightly Sand the Scratch
- Dampen a fine‑grit sandpaper with a small amount of water.
- Gently rub along the length of the scratch in a single direction. The goal is to even out the surface, not to deepen the scratch.
- Frequently wipe the area to inspect progress. Stop once the scratch is no longer visible or has become a subtle indent.
3. Polishing
- Use a microfiber cloth to apply a small amount of a high‑quality plastic polish.
- Rub in gentle, circular motions for about 30 seconds.
- Wipe away excess polish with a clean cloth.
4. Seal the Repair (Optional)
- If the scratch still appears slightly depressed, apply a thin coat of clear polyurethane using a small brush.
- Allow the coat to dry for 24 hours in a dust‑free environment.
- Lightly buff with a clean microfiber cloth to achieve a smooth finish.
Tip: Test any polish or sealant on a hidden area of the case first to ensure it does not alter the color.
Care Tips for Maintaining a Scratch‑Free Case
Even after repairs, ongoing maintenance will keep your Huawei P60 case looking new.
- Avoid Contact with Sharp Objects – Keep the case away from keys, pens, and jewelry when stored.
- Use a Case Sleeve – For backpacks and bags, place the case inside a protective sleeve to reduce friction.
- Regular Cleaning – Wipe down the case weekly with a damp microfiber cloth. This prevents grit from accumulating and causing micro‑scratches.
- Check for Wear – Inspect the case monthly. Early detection of scratches allows for quicker fixes before they worsen.
Frequently Asked Questions
Q: Can I fix a scratch on a silicone case the same way as on a plastic case?
A: Silicone cases are softer and less prone to deep scratches, but if a scar becomes visible, a simple cleaning with mild soap and a microfiber cloth is usually enough. Avoid abrasive tools, as they may damage the silicone surface.
Q: Is it safe to use toothpaste on a phone case?
A: Toothpaste can act as a mild abrasive. Use a non‑glycerin, non‑fluoride toothpaste. Apply a tiny amount, rub gently, and wipe off. Avoid over‑use to prevent dulling the case finish.
Q: Will repairing a scratched case affect its shock‑absorbing ability?
A: Minor repairs typically do not compromise shock protection. However, if the case has cracked or is severely dented, it may have lost its impact‑dampening capacity. In such cases, consider replacing the case entirely.
Final Thoughts
Maintaining the pristine look of a Huawei P60 case is a blend of prevention, timely repairs, and smart case selection. By applying the right cleaning products, polishing techniques, and sealants, you can bring most edge scratches back to life. When the damage is beyond simple DIY solutions, professional services offer a reliable alternative. And by choosing a case with protective edges and durable materials, you reduce the likelihood of future scratches, ensuring that your Huawei P60 stays protected and stylish for years.
Discussion (12)
Join the Discussion
Your comment has been submitted for moderation.
Random Posts
Rebooting Google Nest Hub (3rd Gen) to Resolve App Sync Glitches
Stuck with delayed notifications, unresponsive tiles, or stale smart, home data? A simple reboot of your Nest Hub 3rd Gen clears cache, resets processes, and restores smooth app sync.
3 months ago
Fixing Bluetooth Signal Drops on Apple AirPods Pro
Tired of AirPods Pro disconnecting during walks or workouts? Learn why Bluetooth drops happen, how to spot them, and quick fixes - no coding required - to keep audio flowing.
11 months ago
Fixing the Duplexer Failure on a Brother MFC‑J805DW
Learn how to diagnose and replace a faulty duplexer on your Brother MFC, J805DW, restoring double, sided printing with step, by, step instructions for tech, savvy users.
10 months ago
Solving Apple iPhone 13 Pro Camera Rolling Shutter With External Lens
Stop the slanted look from rolling shutter when adding external lenses to your iPhone 13 Pro by tweaking camera settings, choosing the right lens, and using proper stabilization.
9 months ago
Restoring Bandwidth on Amazon Eero Mesh 6 Pro After a Firmware Update
After an Eero Mesh 6 Pro firmware update, bandwidth often drops. This guide explains why the change occurs and walks you through quick steps to restore full speed and a stable connection for work and play.
8 months ago
Latest Posts
Fixing the Eufy RoboVac 15C Battery Drain Post Firmware Update
Fix the Eufy RoboVac 15C battery drain after firmware update with our quick guide: understand the changes, identify the cause, and follow step by step fixes to restore full runtime.
5 days ago
Solve Reolink Argus 3 Battery Drain When Using PIR Motion Sensor
Learn why the Argus 3 battery drains fast with the PIR sensor on and follow simple steps to fix it, extend runtime, and keep your camera ready without sacrificing motion detection.
5 days ago
Resolving Sound Distortion on Beats Studio3 Wireless Headphones
Learn how to pinpoint and fix common distortion in Beats Studio3 headphones from source issues to Bluetooth glitches so you can enjoy clear audio again.
6 days ago